Drywall is popularly known as gypsum board or plaster board and is used to make interior wall and ceilings. It is better if more than two individuals are involved in the process of drywall installation, because it requires significant lifting of heavy material.
Drywall is very much favored for partitioning. This is because a large number of benefits are associated with it such as flexibility, versatility, excellent performance, dry construction, aesthetic appeal, and great speed in overall process of installation. To install drywall perfectly, you need an adequate amount of skill, artistry and lots of practice. I recommend you guys hiring drywall contractors oklahoma city . Drywall comes in large sheets with dimensions of 4’x12′.
The installation of the drywall is very easy. It is only the taping of joints between panels which requires some practice. Once the hanging of the drywall is complete, the next step is the taping of drywall joints. There are two type of tapes used for this purpose. One is the plane paper black tape and the other is self-adhesive fiberglass tapes. The fiberglass tape can be directly pasted over the drywall.
Materials Required For Taping
The general items required for the process of taping are:
- A banjo drywall taping tool
- 12 inch trowel
- Roll of paper tape
- Setting compounds
- Six inch flexible putty knife
- Four inch flexible putty knife
Sanding, Priming and Finishing
The first step while preparing the surface of drywall repair is to check the entire wall, because most of the time there are small holes and lumps in the wall. If there is any nail or obstacle, then with the help of a hammer, tap them. After this process, you can go ahead and sand the wall for a flawless surface.
The next important step is priming, which is done just before painting. Drywall priming ensures the long lasting ability of the paint and adheres well. In order to avoid dripping of the paint, work from the top and proceed towards the bottom. After completing this, you can proceed to painting.
The final step is drywall finishing. There is nothing wrong with ending up with a good coat of flat paint as doing touch up work with flat paint is very easy. Be sure to allow a 24 hour gap between two coats and make sure that the wall is 100% dry so as to apply the next coat. It is commonly observed that drywall looks completely different once the paint dries off.
Fiberglass to prevent mold growth
The sheet of drywall is generally made of paper but nowadays it is replaced by fiberglass. Fiberglass prevents the growth of mold, which is very common with paper drywall. It has been observed a number of times that when paper drywall is exposed to water through leakage or floods, it triggers the growth of mold. Mold not only affects the local hygiene but also diminishes the overall beauty of the room
Bear in mind that this is just the installation process. Should you require some drywall repair, and you have no idea on how to do it yourself, enlist the services of a certified drywall contractor to be on the safe side. Click to contact .